JY Doll JY-T161/G
The JY-T161/G is a life-sized female love doll by JY Doll. Her body size is about 161 cm, and she weights ca. 38 kg (manufacturer specs).
This body is made of TPE.
Body measurements: 78 cm × 46 cm × 91 cm (B×W×H) / 58 cm (under bust) / 27 cm (neck) / 34 cm (shoulder width) / 62 cm (arm length) / 86 cm (leg length) / 13 cm (palm length) / 21 cm (foot length).
Many attributes may be customized; for example, you can select different skin tones, eye colors, and hair colors - just like you are used from JY Doll.
The JY-T161/G was introduced in October 2020.
Please choose your desired configuration from the following options.
* If you are not sure which option to choose, we will gladly give advice: View contact form.
* If you choose "doesn't matter", we will decide together with the manufacturer corresponding with availability.
* If you have special requirements that are not available in the listed options, we will check with pleasure what is possible: View contact form.
Regarding the Skeleton for all dolls by JY Doll, we use the enhanced skeleton. This newly developed skeleton features an extended range of movements and is more robust. The enhanced skeleton is available in two variants:
* Not standing - the doll can sit and lie down, but not stand. The feet are protected against the ingress of water.
* Standing - the doll can sit, lie down and stand. Three screws are embedded into the soles of each foot. These screws pierce through the skin surface, and the doll can stand on these screws. Though, the feet are not protected against the ingress of water.
The standing option greatly expands the usage scenarios for this love doll and is especially useful for photography. However, please note that the screws are not encapsulated by default; so they can as well poke through strings and socks as damage footwear and floors. We therefore recommend to encapsulate the screws.
The following heads are compatible with the JY Doll JY-T161/G body style:
 aka Grace Mfr ID: Saori
(JY Doll)
Material: Silicone
– Available – |
 aka Grace Mfr ID: Grace
(JY Doll)
Material: Silicone
– Available – |
 aka Elma Mfr ID: Elma
(JY Doll)
Material: Silicone
– Available – |
 aka Chuang Mfr ID: Chuang
(JY Doll)
Material: Silicone
– Available – |
 aka Kasia Mfr ID: Kasia
(JY Doll)
Material: Silicone
– Available – |
 aka Chica Mfr ID: Chica
(JY Doll)
Material: Silicone
– Available – |
 aka Marilyn Mfr ID: Marilyn
(JY Doll)
Material: Silicone
– Available – |
 aka Xiu Yang Mfr ID: Xiu Yang
(JY Doll)
Material: Silicone
– Available – |
 aka Goddess Mfr ID: Goddess
(JY Doll)
Material: Silicone
– Available – |
 aka Jao Mfr ID: Jao
(JY Doll)
Material: Silicone
– Available – |
 aka Hui Xi Mfr ID: Hui Xi
(JY Doll)
Material: Silicone
– Available – |
 aka Bid Mfr ID: Bid
(JY Doll)
Material: Silicone
– Available – |
 aka Amber Mfr ID: Amber
(JY Doll)
Material: Silicone
– Available – |
 aka Jie Mfr ID: Jie
(JY Doll)
Material: Silicone
– Available – |
 aka Sherry Mfr ID: Sherry
(JY Doll)
Material: Silicone
– Available – |
 aka Agata Mfr ID: Agata
(JY Doll)
Material: TPE
– Available – |
 aka Jill Mfr ID: Jill
(JY Doll)
Material: TPE
– Available – |
 aka Eartha Mfr ID: Eartha
(JY Doll)
Material: Silicone
– Available – |
 aka Angela Mfr ID: Angela
(JY Doll)
Material: Silicone
– Available – |
 aka Sylvia Mfr ID: Sylvia
(JY Doll)
Material: Silicone
– Available – |
Love doll. The JY-161 by JY Doll was developed as a love doll and allows vaginal, anal and oral sex - the latter depending on the head used. Though, currently, all compatible TPE heads by JY Doll are capable of oral sex. Usually, silicone heads do not have an oral function.
The doll is water resistant to a certain degree and can be taken to the bathtub for cleaning. However, the JY-161 must not be completely submerged as the neck area is not watertight and must be protected against splashing water and moisture.
Dolls with the "standing skeleton" option are not waterproof. They can only take a shower if the feet are adequately protected against water and moisture.
For cleaning 'it is recommended to use a mild hand soap and clear water. Strongly degreasing detergents and shampoos are to be avoided.
After drying, the doll can be powdered. As a powder, as well cornstarch (from the supermarket) as babypowder (from the drugstore) can be used. If you like fragrances, you can add a splash of your favourite perfume to the powder.
Storage. This doll does not have a back hook and can not be stored upright. The manufacturer recommends to store the JY-161 laying flat on her back. A thick soft foam cushion is suitable as a support. Arms and legs should not lie close to the body.
Please also note our general care instructions for TPE products!
The JY-161's scope of supply' includes
* the body and a head according to your choice,
* a pair of eyes (half-rounds) according to your choice,
* a wig according to your choice,
* a garment according to the manufacturer's choice,
* usage notes (English),
* if applicable, a vagina insert (when the insert option was ordered).
Other accessories are not included with this doll.
However, some of the following 'factory gifts' might or might not be included in the shipment:
* plush blanket,
* condoms,
* TPE stain remover,
* TPE adhesive,
* powder,
* plastic comb,
* plastic enema,
* cotton gloves,
* additional wig.
These accessories change according to availability and are to be considered as optional 'factory gifts'. They are not part of the assured scope of supply in the European sense.
Which components are supplied as 'factory gifts' is a decision of the manufacturer, to which we usually have no influence.
Customizing your doll and assembling the desired configuration. With the form above, you can assemble your desired configuration and then add it to the shopping cart. During the checkout, there is also the possibility to leave comments on the order, for example, if you have questions.
The following customization options are currently available:
* Head - over 80 options;
* Eye color - three options (brown, blue, green);
* Wig - 14 standard options plus eight special wigs;
* Skin color - 4 options (light/white, natural/mid-european, tight tan, tanned);
* Finger and toe nails - various options, including natural/clear; pink; carious other colors possible (on request);
* Vagina - 2 options (built-in/fixed or insert/removeable).
The selected customization options are submitted to the manufacturer and will be confirmed. If certain configuration combinations are not feasible or special requests would lead to surcharges, you will receive a corresponding notification, or otherwise an order confirmation.
For certain models, you can select a Quality Level:
* Standard quality means that the doll is delivered as she is supplied by the factory. In case of controlled delivery, only a goods receipt check is performed. These are precisely the same products, which are referred to elsewhere as "premium quality". Experience has shown that made in Chinea products can be of a high quality, indeed - but also there may be variations in production quality.
* Best possible quality means that an extensive test procedure is carried out by an independent service provider on location in China. This procedure is called Personal Quality Check or in short PQC. More information about the PQC.
A final price offer for the chosen configuration is only made with the order confirmation. Up to this point, you can change configuration options at any time. If you are still unsure about some customizations, give yourself to a few days of contemplation. Only when you are completely satisfied with your desired configuration, you transfer the amount shown in the order confirmation.
Individual production. After payment has cleared, your JY-161 will be individually manufactured and equipped according to the selected customization options. The lead time to make the doll is typically about 14-20 working days. Confirmation photos are only made available by JY Doll in exceptional cases (as of March 2017).
Shipping. Upon completion, your JY-161 will be carefully packed together with the selected head and delivered immediately to the shipping carrier. Shipping to most destinations in the U.S. takes about one week. Your JY-161 will most likely travel with Fedex; if you prefer alternative shipping options, please contact us in advance: View contact form.
For shipment tracking you will receive a tracking code. Within tracking, an estimated delivery date is given.
The following individual customizations are available for this product:
The following blog posts are available for JY Doll JY-T161/G:
 Posted 3 years 30 weeks ago
|
 Posted 3 years 49 weeks ago
|
 Posted 3 years 48 weeks ago
|
 Posted 3 years 46 weeks ago
|
F r e e
Shipping
included
to all regular destinations in the U.S. and Canada
Comparison list
